Determinants of Respirable Crystalline Silica Exposure among Sand-stone Workers

Kanala Chanvirat¹, Naesinee Chaiear^1, and Thitiworn Choosong²

¹Division of Occupational Medicine, Department of Community Medicine, Faculty of Medicine, Khon Kaen University, Thailand

²Department of Family Medicine and Preventive Medicine, Songkla University, Thailand

Cite this paper

Kanala Chanvirat, Naesinee Chaiear and Thitiworn Choosong. Determinants of Respirable Crystalline Silica Exposure among Sand-stone Workers. American Journal of Public Health Research. 2018; 6(2):44-50. doi: 10.12691/AJPHR-6-2-4

Abstract

Objective: Our aim was to determine the occupational exposure level for respirable crystalline silica (RCS) and respirable dust (RD) among sandstone workers. Materials and methods: This study was a descriptive analysis of the occupational exposure to respirable crystalline silica (RCS) and respirable dust (RD), utilizing personal air sampling from the breathing zone. The samples were collected throughout the 8-h working day: 88 samples were collected from workers performing stone cutting in mines and at home (wetting system), as well as stone chiseling and stone carving (22 samples each). Twenty-two samples were collected of the RD using the Gravimetric method (NIOSH 600), while for occupational exposure, the level of RCS was measured using a NIOSH7601 spectrophotometer. Results: Sand-stone workers had a geometric mean occupational exposure to RD of GM 1.84 mg/m³. The highest respiratory dust (RD) concentration (2.83 mg/m³) was found among the stone carvers. Those cutting stone at the mines had the next highest GM (2.65 mg/m³), while the lowest occupational exposure was seen among those chiseling stone(GM 0.9 mg/m3). The occupational exposure to RCS had a geometric mean of 0.10 mg/m³. The highest exposure group was for those cutting stone in the mines (GM = 0.14 mg/m³) followed by those carving stone (GM = 0.10 mg/m³). The moderate exposure group was for those chiseling stone (GM 0.05 mg/m³ ) followed by those cutting stone at home (GM = 0.03 mg/m³). The low exposure group had a GM of 0.03 mg/m³ for RCS. We found the quartz silica concentrations of the sandstone used in this area high (≤90%) as was the percentage of quartz silica in the airborne particulates for stone carving (≤71.4% by volume). Conclusion: The stone cutting in mines group and the stone carving group reached occupational exposure limits to RCS which exceeded the 0.05 mg/m³ OSHA PEL. It is essential to prevent such high exposure through engineering controls, by adapting tools and implementing medical surveillance. All groups had a RCS occupational exposure which would warrant medical surveillance as each group exceeded the OSHA action level of 0.0025 mg/m³.

Keywords

silica, respirable crystalline silica, respirable dust, pneumoconiosis, sand stone

Copyright

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References

[1]	Guthrie, G.D. Jr., Heaney, P.J., “Mineralogical characteristics of silica polymorphs in relation to their biological activities,” Scand J Work Environ Health, 21 (2), 5-8, suppl.1995.
[2]	OSHA, Occupational exposure to respirable crystalline silica-review of health effects literature and preliminary quantitative risk assessment, OSHA, 2010, 1-399 [Online] Available: https://www.osha.gov/silica/Combined_Background.pdf [Accessed July, 1 2017].
[3]	NIOSH, Health effects of occupational exposure to respirable crystalline silica. NIOSH hazard review, 2002, 21-68. [Online] Available: https://www.cdc.gov/niosh/docs/2002-129/pdfs/2002-129.pdf. [Accessed July, 1 2017].
[4]	American Thoracic Society, “Adverse effects of crystalline silica exposure,” Am J Respir Crit Care Med, 155(2).761-768. Feb. 1997.
[5]	NIOSH, NIOSH pocket guide to chemical hazards: silica, crystalline (as respirable dust), NIOSH, 2016. [Online] Available: https://www.cdc.gov/niosh/npg/npgd0684.html. [Accessed July, 2 2017].
[6]	NIOSH, Work-Related Lung Diseases Surveillance Report, NIOSH, 2007, 53-95. [Online] Available: https://www.cdc.gov/niosh/docs/2008-143/pdfs/2008-143a-i.pdf. [Accessed July, 5 2017].
[7]	Bang, K.M., Attfield, M.D., Wood, J.M., Syamlal, G., “National trends in silicosis mortality in the United States,” Am J Ind Med, 51(9). 633-639. Sep. 2008.
[8]	Kortum, E., Bozoki, K., Elimination of silicosis, World Health Orginazation, 2007, 1-20. [Online] Available: http://www.who.int/occupational_health/publications/newsletter/gohnet12e.pdf. [Accessed July, 5 2017].
[9]	Leung,C.C., Yu,I.T., & Chen,W, “Silicosis,” Lancet, 379 (12). 2008-2018.May.2012.
[10]	HSE, Health surveillance for those exposed to respirable crystalline silica (RCS), HSE, 2016. [Online] Available: http://www.hse.gov.uk/pubns/books/healthsurveillance.htm. [Accessed July, 5 2017].
[11]	Milde, J.J, Guidelines for medical examinations: prophylaxis in occupational medicine, Deutsche Gesetzliche Unfallversicherung DGUV, Stuttgart, 2007, 27-36.
[12]	Scott, D, Respirable crystalline silica in the work place, OSHA, 2016. 1-14.
[13]	Wang GR. Screening and survillance of workers exposed to mineral dust Geneva, World Health Organization, 1996, 1-67.
[14]	Bureau of Occupational and Environmental Diseases Thailand, Occupational and environmental disease surveillance system, BOED, 2015.
[15]	NIOSH, Particulates not otherwise regulated, respirable Method 0600, NIOSH Manual of Analytical, 1998, 1-6.
[16]	NIOSH, Silica, crystalline, by VIS: Method 7601, NIOSH Manual of Analytical, 2003, 1-6.
[17]	Department of Labour Protection and Welfare, Limit the concentration of dangerous chemical, DLPW, 2017.
[18]	Eric, J., Michal, B., John, S., Max, K., “Occupational exposure to respirable crystalline silica during hydraulic fracturing.” J Occup Environ Hyg, 10(7).347-356. Mar. 2013.
[19]	Phillips, M.L., Johnson, D.L., & Johnson, A.C., “Determinants of Respirable Silica Exposure in Stone Countertop Fabrication: A Preliminary Study,”. J Occup Environ Hyg, 10(7). 368-373. Apr. 2013.
[20]	Swanepoet, A., Kromhout, H., Jinnah, Z., Portengen, L., “Respirable dust ang Quartz Exposure from three South African Farms,” Ann occ Hyg, 55(6). 638-643. Feb. 2011.
[21]	Archer, J.D., Cooper, G.S., Reist, P.C., Strom, J., Nalander-French, L.A., “Exposure to respirable crystalline silica in eastern North Carolina farm worker,” AIHA J, 63(6).750-755. Nov. 2002.
[22]	Mouammadyan, M., Rokni, M., Yosefinejad, R., “Occupational exposure to respirable crystalline silica in the Iranian Mazandaran province Industry workers” Arh Hig Rada Toksikol, 64. 139-143. Dec. 2013.
[23]	Linch, K.D., Respirable concrete dust-silicosis hazard in the construction industry. Occup Environ Hyg, 17(13). 209-221. Mar. 2002.
[24]	Jared, H., Cooper, David, L., Johnson, “Respirable silica dust supression during artificial stone countertop cutting,” Ann Occup Hyg, 59(1). 122-126. Oct. 2015.
[25]	Saiyed, H.N., Chatterjee, B.B., “Rapid progression of silicosis in slate pencil workers,” Am J Ind Med, 8(2).135-142. Jan. 1985.
[26]	Balmes, J.R., Current Occupational and Environmental Medicine, McGraw-Hill education, 2014, 378-380.
[27]	Silanun, K., Chaiear, N., Rechaipichitkul, K., “Prevalence of Silicosis in stone caving workers being exposed to inorganic dust at sikhiu district Nakhonratchasima province,” Thailand,” J Med Assoc Thai, 100 ( 5). 598-602. Aug. 2017.
[28]	Trakultaweesuk, P., Chaiear, N., Boonsawat, W., Khiewyoo, J., Krisorn, P., Silanun, K., “Spirometry changes in normal or early ILO pneumoconiosis radiographs of sand-dust exposed workers,” J Med Assoc Thai, 100(9). 1035-1044. Sep. 2017.
[29]	Hochgatterer, K., Huttrt, H.P., Moshammer, H., Angerschimd, C., “Lung function of dust-exposed workers,” Pneumologie,65(8). 459-464. Mar. 2011.
[30]	OSHA, Controlling silica exposure in construction, OSHA, 2009, 1-17.